Electric fireplace inserts can help to transform an old wood burning masonry fireplace into electric or provide a focal point for a bespoke installation such as an entertainment center.

Electric inserts can be easier to install compared to other types of fireplace insert because of their minimal venting and clearance requirements but you’ll still need to consider a few things before and during installation.

To install an electric fireplace insert in an existing fireplace:

  1. Remove any old fireplace inserts and ensure that the firebox is clear.
  2. Consider how to prevent water ingress into the existing fireplace, whether that’s in the form of a rain cap or a closure plate.
  3. Close the damper if your existing fireplace has one to help reduce drafts.
  4. Consider how the fireplace will be powered. It’s common to install an electrical outlet inside the firebox of the existing fireplace, or the cord can be run to a nearby electrical outlet outside the firebox but the length of cord and hiding the cord would need to be considered.
  5. Measure the existing fireplace opening to ensure that the back of the new electric fireplace will fit by being smaller than these dimensions, and consider clearance distances in line with your local codes or regulations.
  6. Plug the power cord into the electrical outlet or have the insert hard-wired into the electrics by a professional, depending on the model of electric insert.
  7. Place the electric fireplace insert into the opening of the existing fireplace.
  8. Install any surrounds, mantels or back panels to finish off the new fireplace.
  9. Add any other accessories to the electric fireplace insert such as the media.